The iPhone Dev-Team just recently released the iPhone 3G / 3GS unlocking tool, UltraSn0w 1.2. As mentioned before, the iPhone 4 unlock will take a bit more time for them to release due to it having a different baseband (02.10.04) compared to the 3G / 3GS (05.15.04). We highly recommend that you carefully read the dev-team blog post before proceeding:

Today we’re pleased to announce our free carrier unlock for iPhone3G/3GS owners with a baseband later than 05.13.04.  The unlock for that baseband exploited the AT+XAPP command, thanks to a crash initially discovered by @sherif_hashim (@Oranav also found this crash).  So what hole are we exploiting today, since Apple closed that AT+XAPP hole?  Well, we’re exploiting the exact same hole!

It turns out that the very first iPad firmware 3.2.2 has baseband version 06.15.00 still vulnerable to AT+XAPP. The iPad baseband is built for the exact same baseband chip as the iPhone3G/3GS — they’re fully compatible! Some of us have been running 06.15 for weeks now on our iPhones in preparation for this release.

SIMPLIFIED VERSION:

1. Read and fully understand the warning below.
2. Download this IPSW
3. Run PwnageTool to create a custom 4.1 IPSW.  Tell it you want to use the iPad baseband you just downloaded.  Restore to this custom IPSW.
4. Install ultrasn0w through Cydia
5. Enjoy!
6. If you don’t have a Mac, redsn0w will be released within a few hours to handle this.

FULL VERSION:

Since 06.15 is a higher version than 05.14 or 05.15 (where AT+XAPP is gone), anyone stuck at those versions can simply upgrade to 06.15 to unlock again!  Luckily for us, Apple *still* provides the iPad FW 3.2.2 with this vulnerable baseband right from their own servers. (Grab it now, before they take it down!)

We’ve been busy updating both PwnageTool and redsn0w to make the baseband update as seamless as possible.

1. First up is “PwnageTool 4.1.3 Unlock Edition”.  It has a special dialog box which will ask you if you want to update to the iPad baseband.  You must already have the iPad 3.2.2 IPSW on your computer (see the above link)….so just point PwnageTool at it (or let it find it on its own if you’re in “simple” mode).
2. Directly after PwnageTool 4.1.3 is available, the official ultrasn0w repo https://repo666.ultrasn0w.com will be updated with ultrasn0w 1.2, which covers iPhone 4 baseband 01.59.00 and iPhone 3G/3GS basebands 04.26.08, 05.11.07, 05.12.01, 05.13.04 and now 06.15.00.
3. Finally, we’ll release an update to redsn0w today for those without Macs and can’t run PwnageTool.  The new redsn0w will give you the option to update your baseband to 06.15 too.

WARNING — YOU DO THIS AT YOUR OWN RISK!  PLEASE UNDERSTAND THE CONSEQUENCES OF UPDATING TO 06.15.

1. There is no way to come back down from 06.15, and there’s no hiding the baseband version from Apple.  You’ll be voiding your warranty in a very obvious way.
2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail).  You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Certainly don’t update to 06.15 if you don’t need to!Only do this if you need the unlock and you’re stuck on 05.14 or 05.15, and you’re willing to assume the above risks.

This PwnageTool also contains a 4.2.1 bundle for iPhone3G owners…for all else, it’s still only 4.1.  If you have an iPhone3GS with an old bootrom, the new redsn0w will handle 4.2.1 for you (in fact it covers 4.2.1 for all devices, even though some of them are still tethered at 4.2.1 until @comex can work some untethering magic).  iPhone3GS users with old bootroms who want to go to 4.2.1 should not use this PwnageTool!Update to stock 4.2.1 first, then use the upcoming redsn0w to update your baseband.

Official Bittorrent Releases

PwnageTool 4.1.3  - PwnageTool_4.1.3_Unlock_Edition.dmg.5994102.TPB.torrent

SHA1 Sum = adda6d882dce1b5117d01586037de289407e038a

Unofficial Mirrors

The following links are unofficial download mirrors, you download these archives at your own risk, we accept no responsibility if your computer explodes or if it becomes part of a NASA attacking botnet or even worse if your hands fall off mid-way during the use of these files. We do not check these links and we accept no responsibility with regard to the validity of the files, the other content that these links may provide or with the content that is on the third-party linked site.

Always check the files that you have downloaded against our published SHA1 hash.

We would prefer that you downloaded the official bittorrent release that is linked above, but you are welcome to try these if you really must.

• https://8sv.de/dl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://gumballtech.com/files/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://myblack.co.cc/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://cloud.xtra.me.uk/dev/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://xtra.me.uk/dev/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://www.zaone.ro/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://www.emreunal.com/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://www.cofo.us/idevice/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://ibloo.net/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://jacensolo.com/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://theplacefordee.com/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://loloke.hu/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://powerfree.pl/iphone/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://www.accesoriigsm.net/tools/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://cdn.nspwn.com/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://msby.org/iphone_dev/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://www.tomreinartz.com/DevTeam/PwnageTool_4.1.3_Unlock_Edition.dmg
• https://iNeal.ME/up/pt413.dmg

We will also be posting a detailed step-by-step guide on how to use PwnageTool and the upcoming RedSn0w utility to jailbreak and prepare your baseband for UltraSn0w 1.2 unlocking. So stay tuned by following us on Twitter and/or subscribing to our RSS feed. In the mean time, if you have any questions or concerns, feel free to leave us a comment below!

[Source: iPhone Dev-Team (blog)]

Authors: TechHead

to know more click here